What is the difference between public, protected, package-private and private in Java?

Asked 2023-09-20 20:15:31 View 699,014

In Java, are there clear rules on when to use each of access modifiers, namely the default (package private), public, protected and private, while making class and interface and dealing with inheritance?

  • private hides from other classes within the package. public exposes to classes outside the package. protected is a version of public restricted only to subclasses. - anyone
  • @Tennenrishin — No ; contrary to C++, in Java protected makes the method also accessible from the whole package. This stupidity in Java's visiblity model breaks the goal of protected. - anyone
  • @Nicolas It is accessible from the whole package, with or without protected. As an access modifier, all that protected does is to expose to subclasses outside the package. - anyone
  • @tennenrishin - well, that is what Nicolas said... and you are just repeating it now. What you originally said was that protected - and I quote - 'is a version of public restricted only to subclasses' which is not true by your own admission since protected also allows access through the whole package (ergo, it does not restrict access to subclasses.) - anyone
  • I also agree with Nicolas in that the protected access mode in Java is idiotic. What happened is that Java conflated horizontal (lattice) and vertical access restriction qualifiers. Default scope is a horizontal/lattice restriction with the lattice being the package. Public is another horizontal restriction where the lattice is the whole world. Private and (C++) protected are vertical. It would have been better if we had a cross-cut access, say, protected-package for the rare cases where we actually needed it, leaving protected to be equivalent to the C++ version of protected. - anyone

Answers

The official tutorial may be of some use to you.


Class Package Subclass
(same pkg)
Subclass
(diff pkg)
World
public + + + + +
protected + + + +
no modifier + + +
private +

+ : accessible
blank : not accessible

Answered   2023-09-20 20:15:31

  • World is within your project. I should explain further. Libraries are within your project, and if you're creating a library, they would expose these public classes and methods as well. So, saying just within your project is a bit off. "Everything that uses it" is a better description. - anyone
  • For example, if I have MyClass and I'm doing AnotherClass extends MyClass I will have access to all protected and public methods and properties from within AnotherClass. If I do MyClass myClass = new MyClass(); in AnotherClass somewhere - let's say the constructor - I will only have access to the public methods if it is in a different package. Note that if I do = new MyClass() { @Override protected void protectedMethod() { //some logic } }; it appears that I can access protected methods, but this kind of the same as extending it, but inline instead. - anyone
  • Unfortunately, this answer is a gross oversimplification. Reality is a bit more complicated, especially when you consider protected (which is actually quite a difficult access modifier to fully understand - most people who think they know what protected means really don't). Also, as Bohemian pointed out, it doesn't answer the question - it says nothing about when to use each access modifier. In my opinion, this answer isn't quite bad enough to downvote, but close. But over 4000 upvotes? How did this happen? - anyone
  • @niks protected members CAN be accessed by subclasses from a different package. Isn't that the point? Otherwise what's the difference between default and protected? - anyone
  • @Jack Yeah, niks' comment is wrong despite the many upvotes stating otherwise. The Java Tutorials link in the answer clearly says that protected members can also be accessed within subclasses from a different package. It seems that he/she meant "package-level" instead of "protected", or was referring to a different edit. - anyone

(Caveat: I am not a Java programmer, I am a Perl programmer. Perl has no formal protections which is perhaps why I understand the problem so well :) )

Private

Like you'd think, only the class in which it is declared can see it.

Package Private

It can only be seen and used by the package in which it was declared. This is the default in Java (which some see as a mistake).

Protected

Package Private + can be seen by subclasses or package members.

Public

Everyone can see it.

Published

Visible outside the code I control. (While not Java syntax, it is important for this discussion).

C++ defines an additional level called "friend" and the less you know about that the better.

When should you use what? The whole idea is encapsulation to hide information. As much as possible you want to hide the detail of how something is done from your users. Why? Because then you can change them later and not break anybody's code. This lets you optimize, refactor, redesign, and fix bugs without worrying that someone was using that code you just overhauled.

So, the rule of thumb is to make things only as visible as they have to be. Start with private and only add more visibility as needed. Only make public that which is necessary for the user to know, every detail you make public cramps your ability to redesign the system.

If you want users to be able to customize behaviors, rather than making internals public so they can override them, it's often a better idea to shove those guts into an object and make that interface public. That way they can simply plug in a new object. For example, if you were writing a CD player and wanted the "go find info about this CD" bit customizable, rather than make those methods public you'd put all that functionality into its object and make just your object getter/setter public. In this way being stingy about exposing your guts encourages good composition and separation of concerns

I stick with just "private" and "public". Many OO languages just have that. "Protected" can be handy, but it's a cheat. Once an interface is more than private it's outside of your control and you have to go looking in other people's code to find uses.

This is where the idea of "published" comes in. Changing an interface (refactoring it) requires that you find all the code which is using it and change that, too. If the interface is private, well no problem. If it's protected you have to go find all your subclasses. If it's public you have to go find all the code which uses your code. Sometimes this is possible, for example, if you're working on corporate code that's for internal use only it doesn't matter if an interface is public. You can grab all the code out of the corporate repository. But if an interface is "published", if there is code using it outside your control, then you're hosed. You must support that interface or risk breaking code. Even protected interfaces can be considered published (which is why I don't bother with protected).

Many languages find the hierarchical nature of public/protected/private to be too limiting and not in line with reality. To that end, there is the concept of a trait class, but that's another show.

Answered   2023-09-20 20:15:31

  • friends -> "The less you know about it the better" ---> It gives selective visibility, which is still superior to package privacy. In C++, it has its uses, because not all functions can be member functions, and friends is better than public'ing. Of course there is a danger of misuse by evil minds. - anyone
  • It should also be noted that "protected" in C++ has a different meaning - a protected method is effectively private, but can still be called from an inheriting class. (As opposed to Java where it can be called by any class within the same package.) - anyone
  • @RhysvanderWaerden C# is the same as C++ in this aspect. I find it pretty odd that Java doesn't allow to declare a member that's accessible to the subclass but not the entire package. It's sort of upside down to me - a package is broader scope than a child class! - anyone
  • @KonradMorawski IMHO package is smaller scope than subclass. If you haven't declared your class final, users should be able to subclass it - so java protected is part of your published interface. OTOH, packages are implicitly developed by a single organization: e.g. com.mycompany.mypackage. If your code declares itself in my package, you implicitly declare yourself part of my organization, so we should be communicating. Thus, package publishes to a smaller/easier to reach audience (people in my company) than subclass (people who extend my object) and so counts as lower visibility. - anyone
  • friend is good for defining special relationships between classes. It allows superior encapsulation in many cases when used correctly. For example it can be used by a privileged factory class to inject internal dependencies into a constructed type. It has a bad name because people who don't care about correctly maintaining a well designed object model can abuse it to ease their workload. - anyone

Here's a better version of the table, that also includes a column for modules.

enter image description here


Explanations

  • A private member (i) is only accessible within the same class as it is declared.

  • A member with no access modifier (j) is only accessible within classes in the same package.

  • A protected member (k) is accessible within all classes in the same package and within subclasses in other packages.

  • A public member (l) is accessible to all classes (unless it resides in a module that does not export the package it is declared in).


Which modifier to choose?

Access modifiers is a tool to help you to prevent accidentally breaking encapsulation(*). Ask yourself if you intend the member to be something that's internal to the class, package, class hierarchy or not internal at all, and choose access level accordingly.

Examples:

  • A field long internalCounter should probably be private since it's mutable and an implementation detail.
  • A class that should only be instantiated in a factory class (in the same package) should have a package restricted constructor, since it shouldn't be possible to call it directly from outside the package.
  • An internal void beforeRender() method called right before rendering and used as a hook in subclasses should be protected.
  • A void saveGame(File dst) method which is called from the GUI code should be public.

(*) What is Encapsulation exactly?

Answered   2023-09-20 20:15:31

  • Just saying: there are a lot of people who have problems with distinguishing red/green coloring. Tables using red/green (or yellow/orange/...) coloring schemes are rarely "better" at anything ;-) - anyone
  • @GhostCat, I disagree. I think red/green aligns intuitively with "works"/"does not work" for many people, i.e. it is better than many alternatives. - anyone
  • colourblindawareness.org/colour-blindness/… ... The 8% of colour blind men can be divided approximately into 1% deuteranopes, 1% protanopes, 1% protanomalous and 5% deuteranomalous. And as I am one of those 50% of that 5%, rest assured: red/green sucks. - anyone
  • @GhostCat Ok.. that's a larger part of the population than I expected. I uploaded the image in this color blindness simulator and tested all different modes. Even in monochromacy/achromatopsia mode the color difference is reasonable. Can you see the difference or is the simulator off? (I'm still of the opinion that red/green is very intuitive for color seeing people.) - anyone
  • I can see the difference, but I am also able to pass half of the color blindness tests that we have to do in Germany for the drivers licence ;-) ... but I think such a simulator is "good enough". - anyone
____________________________________________________________________
                | highest precedence <---------> lowest precedence
*———————————————+———————————————+———————————+———————————————+———————
 \ xCanBeSeenBy | this          | any class | this subclass | any
  \__________   | class         | in same   | in another    | class
             \  | nonsubbed     | package   | package       |    
Modifier of x \ |               |           |               |       
————————————————*———————————————+———————————+———————————————+———————
public          |       ✔       |     ✔     |       ✔       |   ✔  
————————————————+———————————————+———————————+———————————————+———————
protected       |       ✔       |     ✔     |       ✔       |   ✘   
————————————————+———————————————+———————————+———————————————+———————
package-private |               |           |               |
(no modifier)   |       ✔       |     ✔     |       ✘       |   ✘   
————————————————+———————————————+———————————+———————————————+———————
private         |       ✔       |     ✘     |       ✘       |   ✘    
____________________________________________________________________

Answered   2023-09-20 20:15:31

  • It is worth putting in words - "Protected modifier makes the object available across other packages, whereas default/no-modifier restricts access to the same package" - anyone
  • @vanguard69, the protected modifier makes the marked thing (class, method, or field) available to some other class in some other package only iff said other class is a subclass of the class where that protected- marked thing is declared. - anyone

Easy rule. Start with declaring everything private. And then progress towards the public as the needs arise and design warrants it.

When exposing members ask yourself if you are exposing representation choices or abstraction choices. The first is something you want to avoid as it will introduce too many dependencies on the actual representation rather than on its observable behavior.

As a general rule I try to avoid overriding method implementations by subclassing; it's too easy to screw up the logic. Declare abstract protected methods if you intend for it to be overridden.

Also, use the @Override annotation when overriding to keep things from breaking when you refactor.

Answered   2023-09-20 20:15:31

  • @RuchirBaronia, "world" = all code in the application, regardless where it is. - anyone
  • Although the info in this answer may be useful, the question was not if we should start by declaring everything private and then exposing things, if we need to do that. - anyone

It's actually a bit more complicated than a simple grid shows. The grid tells you whether an access is allowed, but what exactly constitutes an access? Also, access levels interact with nested classes and inheritance in complex ways.

The "default" access (specified by the absence of a keyword) is also called package-private. Exception: in an interface, no modifier means public access; modifiers other than public are forbidden. Enum constants are always public.

Summary

Is an access to a member with this access specifier allowed?

  • Member is private: Only if member is defined within the same class as calling code.
  • Member is package private: Only if the calling code is within the member's immediately enclosing package.
  • Member is protected: Same package, or if member is defined in a superclass of the class containing the calling code.
  • Member is public: Yes.

What access specifiers apply to

Local variables and formal parameters cannot take access specifiers. Since they are inherently inaccessible to the outside according to scoping rules, they are effectively private.

For classes in the top scope, only public and package-private are permitted. This design choice is presumably because protected and private would be redundant at the package level (there is no inheritance of packages).

All the access specifiers are possible on class members (constructors, methods and static member functions, nested classes).

Related: Java Class Accessibility

Order

The access specifiers can be strictly ordered

public > protected > package-private > private

meaning that public provides the most access, private the least. Any reference possible on a private member is also valid for a package-private member; any reference to a package-private member is valid on a protected member, and so on. (Giving access to protected members to other classes in the same package was considered a mistake.)

Notes

  • A class's methods are allowed to access private members of other objects of the same class. More precisely, a method of class C can access private members of C on objects of any subclass of C. Java doesn't support restricting access by instance, only by class. (Compare with Scala, which does support it using private[this].)
  • You need access to a constructor to construct an object. Thus if all constructors are private, the class can only be constructed by code living within the class (typically static factory methods or static variable initializers). Similarly for package-private or protected constructors.
    • Only having private constructors also means that the class cannot be subclassed externally, since Java requires a subclass's constructors to implicitly or explicitly call a superclass constructor. (It can, however, contain a nested class that subclasses it.)

Inner classes

You also have to consider nested scopes, such as inner classes. An example of the complexity is that inner classes have members, which themselves can take access modifiers. So you can have a private inner class with a public member; can the member be accessed? (See below.) The general rule is to look at scope and think recursively to see whether you can access each level.

However, this is quite complicated, and for full details, consult the Java Language Specification. (Yes, there have been compiler bugs in the past.)

For a taste of how these interact, consider this example. It is possible to "leak" private inner classes; this is usually a warning:

class Test {
    public static void main(final String ... args) {
        System.out.println(Example.leakPrivateClass()); // OK
        Example.leakPrivateClass().secretMethod(); // error
    }
}

class Example {
    private static class NestedClass {
        public void secretMethod() {
            System.out.println("Hello");
        }
    }
    public static NestedClass leakPrivateClass() {
        return new NestedClass();
    }
}

Compiler output:

Test.java:4: secretMethod() in Example.NestedClass is defined in an inaccessible class or interface
        Example.leakPrivateClass().secretMethod(); // error
                                  ^
1 error

Some related questions:

Answered   2023-09-20 20:15:31

  • "modifiers other than public are forbidden" — as of Java 9, this is no longer the case: interfaces can also have private methods. - anyone

As a rule of thumb:

  • private: class scope.
  • default (or package-private): package scope.
  • protected: package scope + child (like package, but we can subclass it from different packages). The protected modifier always keeps the "parent-child" relationship.
  • public: everywhere.

As a result, if we divide access right into three rights:

  • (D)irect (invoke from a method inside the same class, or via "this" syntax).
  • (R)eference (invoke a method using a reference to the class, or via "dot" syntax).
  • (I)nheritance (via subclassing).

then we have this simple table:

+—-———————————————+————————————+———————————+
|                 |    Same    | Different |
|                 |   Package  | Packages  |
+—————————————————+————————————+———————————+
| private         |   D        |           |
+—————————————————+————————————+———————————+
| package-private |            |           |
| (no modifier)   |   D R I    |           |
+—————————————————+————————————+———————————+
| protected       |   D R I    |       I   |
+—————————————————+————————————+———————————+
| public          |   D R I    |    R  I   |
+—————————————————+————————————+———————————+

Answered   2023-09-20 20:15:31

In very short

  • public: accessible from everywhere.
  • protected: accessible by the classes of the same package and the subclasses residing in any package.
  • default (no modifier specified): accessible by the classes of the same package.
  • private: accessible within the same class only.

Answered   2023-09-20 20:15:31

The most misunderstood access modifier in Java is protected. We know that it's similar to the default modifier with one exception in which subclasses can see it. But how? Here is an example which hopefully clarifies the confusion:

  • Assume that we have 2 classes; Father and Son, each in its own package:

    package fatherpackage;
    
    public class Father
    {
    
    }
    
    -------------------------------------------
    
    package sonpackage;
    
    public class Son extends Father
    {
    
    }
    
  • Let's add a protected method foo() to Father.

    package fatherpackage;
    
    public class Father
    {
        protected void foo(){}
    }
    
  • The method foo() can be called in 4 contexts:

    1. Inside a class that is located in the same package where foo() is defined (fatherpackage):

      package fatherpackage;
      
      public class SomeClass
      {
          public void someMethod(Father f, Son s)
          {
              f.foo();
              s.foo();
          }
      }
      
    2. Inside a subclass, on the current instance via this or super:

      package sonpackage;
      
      public class Son extends Father
      {
          public void sonMethod()
          {
              this.foo();
              super.foo();
          }
      }
      
    3. On an reference whose type is the same class:

      package fatherpackage;
      
      public class Father
      {
          public void fatherMethod(Father f)
          {
              f.foo(); // valid even if foo() is private
          }
      }
      
      -------------------------------------------
      
      package sonpackage;
      
      public class Son extends Father
      {
          public void sonMethod(Son s)
          {
              s.foo();
          }
      }
      
    4. On an reference whose type is the parent class and it is inside the package where foo() is defined (fatherpackage) [This can be included inside context no. 1]:

      package fatherpackage;
      
      public class Son extends Father
      {
          public void sonMethod(Father f)
          {
              f.foo();
          }
      }
      
  • The following situations are not valid.

    1. On an reference whose type is the parent class and it is outside the package where foo() is defined (fatherpackage):

      package sonpackage;
      
      public class Son extends Father
      {
          public void sonMethod(Father f)
          {
              f.foo(); // compilation error
          }
      }
      
    2. A non-subclass inside a package of a subclass (A subclass inherits the protected members from its parent, and it makes them private to non-subclasses):

      package sonpackage;
      
      public class SomeClass
      {
          public void someMethod(Son s) throws Exception
          {
              s.foo(); // compilation error
          }
      }
      

Answered   2023-09-20 20:15:31

  • Object#clone() is an example of a protected member. - anyone
  • What is the difference between doing super.foo() and the first invalid situation f.foo()? - anyone
  • @cst1992 It's confusing but see the Java Language Specification 6.6.2: "A protected member or constructor of an object may be accessed from outside the package in which it is declared only by code that is responsible for the implementation of that object". With super.foo() the reference "super" is "directly responsible for the implementation" but the reference "f" is not. Why? Because you can be 100% certain that "super" is of type Father, but not for "f"; at run-time it could be some other sub-type of Father. See docs.oracle.com/javase/specs/jls/se9/html/… - anyone
  • It's refreshing to read an answer from someone who understands protected. Unfortunately, all the other answers on this page that define protected get it a little bit wrong. - anyone
  • This is not what the official Oracle site says: "The protected modifier specifies that the member can only be accessed within its own package (as with package-private) and, in addition, by a subclass of its class in another package." - docs.oracle.com/javase/tutorial/java/javaOO/accesscontrol.html - anyone

Private

  • Methods,Variables and Constructors

Methods, Variables and Constructors that are declared private can only be accessed within the declared class itself.

  • Class and Interface

Private access modifier is the most restrictive access level. Class and interfaces cannot be private.

Note

Variables that are declared private can be accessed outside the class if public getter methods are present in the class. Variables, methods and constructors which are declared protected in a superclass can be accessed only by the subclasses in other package or any class within the package of the protected members' class.


Protected

  • Class and Interface

The protected access modifier cannot be applied to class and interfaces.

Methods, fields can be declared protected, however methods and fields in a interface cannot be declared protected.

Note

Protected access gives the subclass a chance to use the helper method or variable, while preventing a nonrelated class from trying to use it.


Public

A class, method, constructor, interface etc declared public can be accessed from any other class.

Therefore fields, methods, blocks declared inside a public class can be accessed from any class belonging to the Java Universe.

  • Different Packages

However if the public class we are trying to access is in a different package, then the public class still need to be imported.

Because of class inheritance, all public methods and variables of a class are inherited by its subclasses.


Default -No keyword:

Default access modifier means we do not explicitly declare an access modifier for a class, field, method, etc.

  • Within the same Packages

A variable or method declared without any access control modifier is available to any other class in the same package. The fields in an interface are implicitly public static final and the methods in an interface are by default public.

Note

We cannot Override the Static fields.if you try to override it does not show any error but it doesnot work what we except.

Related Answers

References links

http://docs.oracle.com/javase/tutorial/java/javaOO/accesscontrol.html http://www.tutorialspoint.com/java/java_access_modifiers.htm

Answered   2023-09-20 20:15:31

The difference can be found in the links already provided but which one to use usually comes down to the "Principle of Least Knowledge". Only allow the least visibility that is needed.

Answered   2023-09-20 20:15:31

Private: Limited access to class only

Default (no modifier): Limited access to class and package

Protected: Limited access to class, package and subclasses (both inside and outside package)

Public: Accessible to class, package (all), and subclasses... In short, everywhere.

Answered   2023-09-20 20:15:31

Java access modifies

enter image description here

Access modifier can be applicable for class, field[About], method. Try to access, subclass or override this.

  • Access to field or method is through a class.
  • Inheritance and Open Closed Principle[About]
    • Successor class(subclass) access modifier can be any.
    • Successor method(override) access modifier should be the same or expand it

Top level class(first level scope) can be public and default. Nested class[About] can have any of them

package is not applying for package hierarchy

[Swift access modifiers]

Answered   2023-09-20 20:15:31

Access modifiers are there to restrict access at several levels.

Public: It is basically as simple as you can access from any class whether that is in same package or not.

To access if you are in same package you can access directly, but if you are in another package then you can create an object of the class.

Default: It is accessible in the same package from any of the class of package.

To access you can create an object of the class. But you can not access this variable outside of the package.

Protected: you can access variables in same package as well as subclass in any other package. so basically it is default + Inherited behavior.

To access protected field defined in base class you can create object of child class.

Private: it can be access in same class.

In non-static methods you can access directly because of this reference (also in constructors)but to access in static methods you need to create object of the class.

Answered   2023-09-20 20:15:31

Access modifiers in Java.

Java access modifiers are used to provide access control in Java.

1. Default:

Accessible to the classes in the same package only.

For example,

// Saved in file A.java
package pack;

class A{
  void msg(){System.out.println("Hello");}
}

// Saved in file B.java
package mypack;
import pack.*;

class B{
  public static void main(String args[]){
   A obj = new A(); // Compile Time Error
   obj.msg(); // Compile Time Error
  }
}

This access is more restricted than public and protected, but less restricted than private.

2. Public

Can be accessed from anywhere. (Global Access)

For example,

// Saved in file A.java

package pack;
public class A{
  public void msg(){System.out.println("Hello");}
}

// Saved in file B.java

package mypack;
import pack.*;

class B{
  public static void main(String args[]){
    A obj = new A();
    obj.msg();
  }
}

Output:Hello

3. Private

Accessible only inside the same class.

If you try to access private members on one class in another will throw compile error. For example,

class A{
  private int data = 40;
  private void msg(){System.out.println("Hello java");}
}

public class Simple{
  public static void main(String args[]){
    A obj = new A();
    System.out.println(obj.data); // Compile Time Error
    obj.msg(); // Compile Time Error
  }
}

4. Protected

Accessible only to the classes in the same package and to the subclasses

For example,

// Saved in file A.java
package pack;
public class A{
  protected void msg(){System.out.println("Hello");}
}

// Saved in file B.java
package mypack;
import pack.*;

class B extends A{
  public static void main(String args[]){
    B obj = new B();
    obj.msg();
  }
}

Output: Hello

Enter image description here

Answered   2023-09-20 20:15:31

Visible to the package. The default. No modifiers are needed.

Visible to the class only (private).

Visible to the world (public).

Visible to the package and all subclasses (protected).

Variables and methods can be declared without any modifiers that are called. Default examples:

String name = "john";

public int age(){
    return age;
}

Private access modifier - private:

Methods, variables and constructors that are declared private can only be accessed within the declared class itself. The private access modifier is the most restrictive access level. Class and interfaces cannot be private.

Variables that are declared private can be accessed outside the class if public getter methods are present in the class.

Using the private modifier is the main way that an object encapsulates itself and hides data from the outside world.

Examples:

Public class Details{

    private String name;

    public void setName(String n){
        this.name = n;
    }

    public String getName(){
        return this.name;
    }
}

Public access modifier - public:

A class, method, constructor, interface, etc. declared public can be accessed from any other class. Therefore fields, methods, blocks declared inside a public class can be accessed from any class belonging to the Java universe.

However, if the public class we are trying to access is in a different package, then the public class still need to be imported.

Because of class inheritance, all public methods and variables of a class are inherited by its subclasses.

Example:

public void cal(){

}

Protected access modifier - protected:

Variables, methods and constructors which are declared protected in a superclass can be accessed only by the subclasses in another package or any class within the package of the protected members' class.

The protected access modifier cannot be applied to class and interfaces. Methods, fields can be declared protected, however methods and fields in a interface cannot be declared protected.

Protected access gives the subclass a chance to use the helper method or variable, while preventing a nonrelated class from trying to use it.

class Van{

    protected boolean speed(){

    }
}

class Car{
    boolean speed(){
    }

}

Answered   2023-09-20 20:15:31

  • public - accessible from anywhere in the application.

  • default - accessible from package.

  • protected - accessible from package and sub-classes in other package. as well

  • private - accessible from its class only.

Answered   2023-09-20 20:15:31

This page writes well about the protected & default access modifier

.... Protected: Protected access modifier is the a little tricky and you can say is a superset of the default access modifier. Protected members are same as the default members as far as the access in the same package is concerned. The difference is that, the protected members are also accessible to the subclasses of the class in which the member is declared which are outside the package in which the parent class is present.

But these protected members are “accessible outside the package only through inheritance“. i.e you can access a protected member of a class in its subclass present in some other package directly as if the member is present in the subclass itself. But that protected member will not be accessible in the subclass outside the package by using parent class’s reference. ....

Answered   2023-09-20 20:15:31

  • Just to add this "Once the child gets access to the parent class’s protected member, it becomes private (or rather I would say a special private member which can be inherited by the subclasses of the subclass) member of the subclass." - anyone

David's answer provides the meaning of each access modifier. As for when to use each, I'd suggest making public all classes and the methods of each class that are meant for external use (its API), and everything else private.

Over time you'll develop a sense for when to make some classes package-private and when to declare certain methods protected for use in subclasses.

Answered   2023-09-20 20:15:31

Differences between public, private, default and protected access modifiers

This image will make you understand easily about the basic differences between public, private, protected and default access modifiers. The default modifier takes place automatically when you don't declare ant access modifiers in your code.

Answered   2023-09-20 20:15:31

  • For more clarity, no modifier == package private | package protected - anyone

Public Protected Default and private are access modifiers.

They are meant for encapsulation, or hiding and showing contents of the class.

  1. Class can be public or default
  2. Class members can be public, protected, default or private.

Private is not accessible outside the class Default is accessible only in the package. Protected in package as well as any class which extends it. Public is open for all.

Normally, member variables are defined private, but member methods are public.

Answered   2023-09-20 20:15:31

  • Default is not an access modifier, and two of the others are misspelt. - anyone

Note: This is just a supplement for the accepted answer.

This is related to Java Access Modifiers.

From Java Access Modifiers:

A Java access modifier specifies which classes can access a given class and its fields, constructors and methods. Access modifiers can be specified separately for a class, its constructors, fields and methods. Java access modifiers are also sometimes referred to in daily speech as Java access specifiers, but the correct name is Java access modifiers. Classes, fields, constructors and methods can have one of four different Java access modifiers:

  • List item
  • private
  • default (package)
  • protected
  • public

From Controlling Access to Members of a Class tutorials:

Access level modifiers determine whether other classes can use a particular field or invoke a particular method. There are two levels of access control:

  • At the top level—public, or package-private (no explicit modifier).
  • At the member level—public, private, protected, or package-private (no explicit modifier).

A class may be declared with the modifier public, in which case that class is visible to all classes everywhere. If a class has no modifier (the default, also known as package-private), it is visible only within its own package

The following table shows the access to members permitted by each modifier.

╔═════════════╦═══════╦═════════╦══════════╦═══════╗
║ Modifier    ║ Class ║ Package ║ Subclass ║ World ║
╠═════════════╬═══════╬═════════╬══════════╬═══════╣
║ public      ║ Y     ║ Y       ║ Y        ║ Y     ║
║ protected   ║ Y     ║ Y       ║ Y        ║ N     ║
║ no modifier ║ Y     ║ Y       ║ N        ║ N     ║
║ private     ║ Y     ║ N       ║ N        ║ N     ║
╚═════════════╩═══════╩═════════╩══════════╩═══════╝

The first data column indicates whether the class itself has access to the member defined by the access level. As you can see, a class always has access to its own members. The second column indicates whether classes in the same package as the class (regardless of their parentage) have access to the member. The third column indicates whether subclasses of the class declared outside this package have access to the member. The fourth column indicates whether all classes have access to the member.

Access levels affect you in two ways. First, when you use classes that come from another source, such as the classes in the Java platform, access levels determine which members of those classes your own classes can use. Second, when you write a class, you need to decide what access level every member variable and every method in your class should have.

Answered   2023-09-20 20:15:31

  • what exactly is the supplement, and why is it not an edit to the existing post? - anyone
  • the supplement is Access Modifiers. Why not an edit? To keep the accepted answer unaltered for historical sake and to give my answer. - anyone

Often times I've realized that remembering the basic concepts of any language can made possible by creating real-world analogies. Here is my analogy for understanding access modifiers in Java:

Let's assume that you're a student at a university and you have a friend who's coming to visit you over the weekend. Suppose there exists a big statue of the university's founder in the middle of the campus.

  • When you bring him to the campus, the first thing that you and your friend sees is this statue. This means that anyone who walks in the campus can look at the statue without the university's permission. This makes the statue as PUBLIC.

  • Next, you want to take your friend to your dorm, but for that you need to register him as a visitor. This means that he gets an access pass (which is the same as yours) to get into various buildings on campus. This would make his access card as PROTECTED.

  • Your friend wants to login to the campus WiFi but doesn't have the any credentials to do so. The only way he can get online is if you share your login with him. (Remember, every student who goes to the university also possesses these login credentials). This would make your login credentials as NO MODIFIER.

  • Finally, your friend wants to read your progress report for the semester which is posted on the website. However, every student has their own personal login to access this section of the campus website. This would make these credentials as PRIVATE.

Hope this helps!

Answered   2023-09-20 20:15:31

When you are thinking of access modifiers just think of it in this way (applies to both variables and methods):

public --> accessible from every where
private --> accessible only within the same class where it is declared

Now the confusion arises when it comes to default and protected

default --> No access modifier keyword is present. This means it is available strictly within the package of the class. Nowhere outside that package it can be accessed.

protected --> Slightly less stricter than default and apart from the same package classes it can be accessed by sub classes outside the package it is declared.

Answered   2023-09-20 20:15:31

It is all about encapsulation (or as Joe Phillips stated, least knowledge).

Start with the most restrictive (private) and see if you need less restrictive modifiers later on.

We all use method and member modifiers like private, public, ... but one thing too few developers do is use packages to organize code logically.

For example: You may put sensitive security methods in a 'security' package. Then put a public class which accesses some of the security related code in this package but keep other security classes package private. Thus other developers will only be able to use the publicly available class from outside of this package (unless they change the modifier). This is not a security feature, but will guide usage.

Outside world -> Package (SecurityEntryClass ---> Package private classes)

Another thing is that classes which depend a lot on each other may end up in the same package and could eventually be refactored or merged if the dependency is too strong.

If on the contrary you set everything as public it will not be clear what should or should not be accessed, which may lead to writing a lot of javadoc (which does not enforce anything via the compiler...).

Answered   2023-09-20 20:15:31

My two cents :)

private:

class -> a top level class cannot be private. inner classes can be private which are accessible from same class.

instance variable -> accessible only in the class. Cannot access outside the class.

package-private:

class -> a top level class can be package-private. It can only be accessible from same package. Not from sub package, not from outside package.

instance variable -> accessible from same package. Not from sub package, not from outside package.

protected:

class -> a top level class cannot be protected.

instance variable -> Only accessible in same package or subpackage. Can only be access outside the package while extending class.

public:

class -> accessible from package/subpackage/another package

instance variable -> accessible from package/subpackage/another package

Here is detailed answer

https://github.com/junto06/java-4-beginners/blob/master/basics/access-modifier.md

Answered   2023-09-20 20:15:31

For beginners considering this example can be helpful;

Consider I have developed MyClass in foo package and it has a fantastic method named print which you are interested in calling it ( it could be a method or property )

package foo;  // I am in foo 
public class MyClass {
     private void print() { //This is private
        System.out.println("I can print!");
    }
}

You have developed YourClass in bar package, and you are interested to use MyClass#print

package bar; \\You are not in same package as me 
import foo.MyClass;    
public class YourClass {
    void test() {
        MyClass myClass = new MyClass();
        myClass.print();
    }
}

Your code is not compile and you get error The method print() is undefined for the type MyClass

You come to me:

  • You: I want to use your method but it is private. Can you make it public?
  • Me : No I don't want others use it
  • You: I am your friend at least let me not others use it.
  • Me : Ok I will remove the private keyword. My Access modifier will be default or private package. As you are my friend you must be in same package as me. So you must come to my package foo. I mean exact package not even a sub package.

Then MyClass will be

package foo;    
public class MyClass {    
    void print() { //No access modifier means default or package-private 
        System.out.println("I can print!");
    }   
}

YourClass will be :

package foo;//You come to my package
public class YourClass {
    void test() {
        MyClass myClass = new MyClass();
        myClass.print();
    }
}

No consider this: Again you come to me

  • You: My boss told me I can not change my package ( In actual world you can not change you package to use other classes methods)
  • Me : There is another way, if you extend me and I make print() protected, then you can use it whether you change you package or not. ( So sub classing will always give you access to my method).

Here is MyClass

package foo;
protected class MyClass { // it is now protected
     protected void print() {
        System.out.println("I can print!");
    }   
}

Here is YourClass

package bar; // You are on your own package
import foo.MyClass;
public class YourClass extends MyClass {
    void  test() {
        //You initiate yourself! But as you extend me you can call my print()
        YourClass yourClass = new YourClass(); 
        yourClass.print();
    }
}

You may have noticed that by making a method protected all other classes can use it by extending it, you can not easily control how can use it. This was solved in java 17 by introducing sealed and permits words. So you can define which classes can extend you. By something like public sealed class MyClass permits YourClass See What are sealed classes in Java 17? for more info

Answered   2023-09-20 20:15:31

  1. public: Use for wide accessibility across your codebase and in different packages. Suitable for classes and methods you want to expose universally.
  2. protected: Provides access within the same package and in subclasses, even in different packages. Useful for balancing encapsulation with subclass access.
  3. Default (Package Private): No explicit modifier; accessible within the same package. Offers encapsulation while allowing access within a package.
  4. private: Restricts access to within the class. Ideal for hiding implementation details from other classes.

Inheritance:

Classes:

  1. public: Subclassable by any class.
  2. protected: Subclassable within the same package and in different packages.
  3. Default: Subclassable within the same package.
  4. private: Not subclassable.

Methods and Fields:

  1. public: Accessible everywhere.
  2. protected: Accessible within the same package and in subclasses.
  3. Default: Accessible within the same package.
  4. private: Accessible only within the same class.

Subclasses can't have more restrictive access than their superclasses for overridden methods or fields.

Answered   2023-09-20 20:15:31

when talking about access modifiers we can easy to understand, very simple rules include them.

Private Access modifier use in: - Only same class

Default Access modifier use in: - Only same class / Same package subclasses

Protected Access modifier use in: - same class / Same package subclasses / Same package non - subclasses / Different package subclasses

Public Access modifier use in:- we can use anywhere (same class / Same package subclasses / Same package non - subclasses / Different package subclasses/ Different package non - subclasses)

Answered   2023-09-20 20:15:31

  • As it’s currently written, your answer is unclear. Please edit to add additional details that will help others understand how this addresses the question asked. You can find more information on how to write good answers in the help center. - anyone
  • public

If a class member is declared to be public then it can be accessed from anywhere

  • protected

    If a class member is declared with keyword protected, it can be accessed from the same class members, outside class members within the same package, and inherited class members. If a class member is protected then it can NOT be accessed from an outside package class unless the outside packaged class is inherited i.e. extends the other package superclass. But a protected class member is always available to the same package classes it does NOT matter whether the same package class is inherited or NOT

  • default

    In Java default is NOT an access modifier keyword. If a class member is declared without any access modifier keyword, it is considered a default member. The default class member is always available to the same package class members. But outside package class members can NOT access default class members even if outside classes are subclasses unlike protected members

  • private

If a class member is declared with keyword protected then in this case it is available ONLY to the same class members

Answered   2023-09-20 20:15:31