Download a specific tag with Git

Asked 2023-09-20 20:57:12 View 934,365

I'm trying to figure out how I can download a particular tag of a Git repository - it's one version behind the current version.

I saw there was a tag for the previous version on the git web page, with object name of something long hex number.

But the version name is "Tagged release 1.1.5" according the site.

I tried a command like this (with names changed):

git clone http://git.abc.net/git/abc.git my_abc

And I did get something - a directory, a bunch of subdirectories, etc.

If it's the whole repository, how do I get at the version I'm seeking? If not, how do I download that particular version?

  • I develop on a completely different repo then the production, so my production didn't know any tags when I tried to use git checkout. The solution was to use "git pull --tags" then use git checkout. - anyone
  • "git fetch --tags" works too - anyone
  • To avoid cloning the whole repository then switching to a tag, you can directly do a clone -b "Tagged release 1.1.5" http://git.abc.net/git/abs.git my_abc. This will only work if you don't have a branch with the same name of course (depending on your methodology, this may never happen). - anyone
  • @RedGlyph Thanks i will try it. Else we can do like this. git checkout -b new-branch tag-name. Now clone your new-branch. When ever we want we can delete the new-branch. - anyone

Answers

$ git clone

will give you the whole repository.

After the clone, you can list the tags with $ git tag -l and then checkout a specific tag:

$ git checkout tags/<tag_name>

Even better, checkout and create a branch (otherwise you will be on a branch named after the revision number of tag):

$ git checkout tags/<tag_name> -b <branch_name>

Answered   2023-09-20 20:57:12

  • Yep. git is different to subversion in this respect. A svn tag basically copies the files to a new folder, so you can svn checkout a specific bunch of files, whereas git tags are simply pointers to specific revisions. - anyone
  • What if you have a branch and a tag that have the same name? If you just say "git checkout <name>" it says "warning: refname '<name>' is ambiguous. Switched to branch '<name>'" -- how do you tell it to switch to the tag instead? - anyone
  • when doing a checkout and as Derek mentioned, the repo goes into a "detached head" state. instead, add the -b flag telling git to create a new branch and specify a branch name: git checkout <tag_name> -b <branch_name> - anyone
  • @hellatan You should only do that when you actually want to create a branch, but most of the time you probably don't. Running in "detached head" state won't hurt you, and is likely exactly what you want if you just want to check some git history. - anyone
  • In git version 1.8.3.5 and newer, the --branch <tag ref> should allow you to download the repository starting at your <tag ref> as the repo HEAD; combined with --depth 1 will do a shallow tag checkout. See stackoverflow.com/a/21699307/1695680 - anyone
git clone --branch my_abc http://git.abc.net/git/abc.git

Will clone the repo and leave you on the tag you are interested in.

Documentation for 1.8.0 of git clone states.

--branch can also take tags and detaches the HEAD at that commit in the resulting repository.

Answered   2023-09-20 20:57:12

  • This does (at least now) work for tags, though you end up in a detached HEAD state. - anyone
  • FYI: Also specify --depth 1 to avoid downloading any non-current commits. - anyone
  • This indeed does not work with tags. Only branches. Edit: It looks like only newer versions of git supports that. - anyone
  • We can also edit .git/config (or somehow configure it) to do a shallow clone of two or more tags, if that might be needed, upgrade a shallow clone to full clone, etc. - anyone
  • you can also specify the branch you want along with the tag. Like git clone --branch my_abc http://git.abc.net/git/abc.git -b quality quality is the name of the branch we want btw. - anyone

For checking out only a given tag for deployment, I use e.g.:

git clone -b 'v2.0' --single-branch --depth 1 https://github.com/git/git.git

This seems to be the fastest way to check out code from a remote repository if one has only interest in the most recent code instead of in a complete repository. In this way, it resembles the 'svn co' command.

Note: Per the Git manual, passing the --depth flag implies --single-branch by default.

--depth

Create a shallow clone with a history truncated to the specified number of commits. Implies --single-branch unless --no-single-branch is given to fetch the histories near the tips of all branches. If you want to clone submodules shallowly, also pass --shallow-submodules.

Answered   2023-09-20 20:57:12

  • --depth n implies --single-branch. You don't need both. - anyone
  • @RyanNerd +1 :) Also, just a note for anyone else who spent the last hour figuring this out: do not quote the branch/tag name if running this command on Windows. It will literally include the quotes as-is when looking for the branch/tag - anyone
  • I am trying to clone as part of a script for deployment. Is there a way to hide the 'detached head' message? I have tried: git clone -b 'v2.0' --quiet --depth 1 https://github.com/git/git.git That doesn't work though. - anyone
  • @saltedlolly there's an option for this: git clone -c advice.detachedHead=false --depth 1 -b v2.0 https://github.com/git/git.git - anyone

I'm not a git expert, but I think this should work:

git clone http://git.abc.net/git/abc.git
cd abc
git checkout my_abc 

OR

git clone http://git.abc.net/git/abc.git
cd abc
git checkout -b new_branch my_abc

The second variation establishes a new branch based on the tag, which lets you avoid a 'detached HEAD'. (git-checkout manual)

Every git repo contains the entire revision history, so cloning the repo gives you access to the latest commit, plus everything that came before, including the tag you're looking for.

Answered   2023-09-20 20:57:12

  • Thx. I needed to use git checkout -b b1.5.0 v1.5.0 when checking out a version within a 'gh-pages' branch to successfully push to Github Pages. This Gist I wrote up might help others re: branch/tag/submodules... gist.github.com/1064750 - anyone
  • I don't think this is completely accurate (for e.g. pasting into terminal) since you gotta cd into abc/ first before you can checkout a branch - anyone
  • @StevenLu You are correct of course. I was going for concepts rather than cut-and-paste, but it might as well be as accurate as possible. I've added the cd. - anyone

You can use git archive to download a tar ball for a given tag or commit id:

git archive --format=tar --remote=[hostname]:[path to repo] [tag name] > tagged_version.tar

You can also export a zip archive of a tag.

  1. List tags:

    git tag
    
    0.0.1
    0.1.0
    
  2. Export a tag:

    git archive -o /tmp/my-repo-0.1.0.zip --prefix=my-repo-0.1.0/ 0.1.0
    
  3. Notes:

    • You do not need to specify the format. It will be picked up by the output file name.
    • Specifying the prefix will make your code export to a directory (if you include a trailing slash).

Answered   2023-09-20 20:57:12

  • This command does not work with submodules, see stackoverflow.com/questions/1591387/… - anyone
  • But git archive also removes the version control, so you can't just do another git checkout to upgrade to the next tag. - anyone
  • Yes you lose version control but the time git archive saves compared to git clone is ABSOLUTELY UNBELIEVABLE! +1 - anyone
  • This is SO CLOSE to what I want, except that git archive is asking me for a password when all I want to do is download from a public repo. How can I make it use http instead of ssh? - anyone
  • This fails with the fatal: Operation not supported by protocol. and Unexpected end of command stream errors. Alternatively, it can also return the fatal: The remote end hung up unexpectedly error. - anyone

Use the --single-branch switch (available as of Git 1.7.10). The syntax is:

git clone -b <tag_name> --single-branch <repo_url> [<dest_dir>] 

For example:

git clone -b 'v1.9.5' --single-branch https://github.com/git/git.git git-1.9.5

The benefit: Git will receive objects and (need to) resolve deltas for the specified branch/tag only - while checking out the exact same amount of files! Depending on the source repository, this will save you a lot of disk space. (Plus, it'll be much quicker.)

Answered   2023-09-20 20:57:12

  • Whoever downvoted/downvotes this answer: Please also leave a comment with a brief explanation for the downvote. (Just asking, because I'm a bit confused. Because, afaik, this is the best solution for the given problem. And if you don't think so, I'd like to know why.) Many thanks. - anyone
  • Don't try to make too much sense of the downvotes .. your answer is very good, their downvotes are likely unsubstantiated .. that's life on SOF.. - anyone

first fetch all the tags in that specific remote

git fetch <remote> 'refs/tags/*:refs/tags/*'

or just simply type

git fetch <remote>

Then check for the available tags

git tag -l

then switch to that specific tag using below command

git checkout tags/<tag_name>

Hope this will helps you!

Answered   2023-09-20 20:57:12

  • why use ´git tag -l´ it should be the same as ´git tag´ ? - anyone
  • @serup; git tag will add a tag while git tag -l lists the available tags - anyone
  • That's the best answer - anyone

If your tags are sortable using the linux sort command, use this:

git tag | sort -n | tail -1

eg. if git tag returns:

v1.0.1
v1.0.2
v1.0.5
v1.0.4

git tag | sort -n | tail -1 will output:

v1.0.5

git tag | sort -n | tail -2 | head -1 will output:

v1.0.4

(because you asked for the second most recent tag)

to checkout the tag, first clone the repo, then type:

git checkout v1.0.4

..or whatever tag you need.

Answered   2023-09-20 20:57:12

  • Until you reach v1.0.10, and then bad things happen :) - anyone
  • To have your tags sorted chronologically : git for-each-ref --sort='*authordate' --format='%(tag)' refs/tags - anyone
  • One-liner to automatically checkout the latest version, git checkout `git tag | sort -n | tail -1` - anyone
  • You might want to use sort -V instead of sort -n. The former correctly handles versions, which are not necessarily numeric, e.g. "1.2.3". It also understands that "0.4.10" goes after "0.4.1" and not after "0.4.2" which -n will give you. - anyone
git fetch <gitserver> <remotetag>:<localtag>

===================================

I just did this. First I made sure I knew the tag name spelling.

git ls-remote --tags gitserver; : or origin, whatever your remote is called

This gave me a list of tags on my git server to choose from. The original poster already knew his tag's name so this step is not necessary for everyone. The output looked like this, though the real list was longer.

8acb6864d10caa9baf25cc1e4857371efb01f7cd    refs/tags/v5.2.2.2
f4ba9d79e3d760f1990c2117187b5010e92e1ea2    refs/tags/v5.2.3.1
8dd05466201b51fcaf4ca85897347d82fcb29518    refs/tags/Fix_109
9b5087090d9077c10ba22d99d5ce90d8a45c50a3    refs/tags/Fix_110

I picked the tag I wanted and fetched that and nothing more as follows.

git fetch gitserver Fix_110

I then tagged this on my local machine, giving my tag the same name.

git tag Fix_110 FETCH_HEAD

I didn't want to clone the remote repository as other people have suggested doing, as the project I am working on is large and I want to develop in a nice clean environment. I feel this is closer to the original questions "I'm trying to figure out how do download A PARTICULAR TAG" than the solution which suggests cloning the whole repository. I don't see why anyone should have to have a copy of Windows NT and Windows 8.1 source code if they want to look at DOS 0.1 source code (for example).

I also didn't want to use CHECKOUT as others have suggested. I had a branch checked out and didn't want to affect that. My intention was to fetch the software I wanted so that I could cherry-pick something and add that to my development.

There is probably a way to fetch the tag itself rather than just a copy of the commit that was tagged. I had to tag the fetched commit myself. EDIT: Ah yes, I have found it now.

git fetch gitserver Fix_110:Fix_110

Where you see the colon, that is remote-name:local-name and here they are the tag names. This runs without upsetting the working tree etc. It just seems to copy stuff from the remote to the local machine so you have your own copy.

git fetch gitserver --dry-run Fix_110:Fix_110

with the --dry-run option added will let you have a look at what the command would do, if you want to verify its what you want. So I guess a simple

git fetch gitserver remotetag:localtag

is the real answer.

=

A separate note about tags ... When I start something new I usually tag the empty repository after git init, since

git rebase -i XXXXX 

requires a commit, and the question arises "how do you rebase changes that include your first software change?" So when I start working I do

git init
touch .gitignore
[then add it and commit it, and finally]
git tag EMPTY

i.e. create a commit before my first real change and then later use

git rebase -i EMPTY 

if I want to rebase all my work, including the first change.

Answered   2023-09-20 20:57:12

I checked the git checkout documentation, it revealed one interesting thing:

git checkout -b <new_branch_name> <start_point> , where the <start_point> is the name of a commit at which to start the new branch; Defaults to HEAD

So we can mention the tag name( as tag is nothing but a name of a commit) as, say:

>> git checkout -b 1.0.2_branch 1.0.2
later, modify some files
>> git push --tags

P.S: In Git, you can't update a tag directly(since tag is just a label to a commit), you need to checkout the same tag as a branch and then commit to it and then create a separate tag.

Answered   2023-09-20 20:57:12

  • Or if you don't expect to make any changes and you just want to look at what the code looked like at that tag, you can just checkout the tag without creating a branch. You'll get some text explaining that you're in "detached head" state, and you can always create the branch later if you want to. - anyone

Working off of Peter Johnson's answer, I created a nice little alias for myself:

alias gcolt="git checkout $(git tag | sort -V | tail -1)"

aka 'git checkout latest tag'.

This relies on the GNU version of sort, which appropriately handles situations like the one lOranger pointed out:

v1.0.1
...
v1.0.9
v1.0.10

If you're on a mac, brew install coreutils and then call gsort instead.

Answered   2023-09-20 20:57:12

try:

git clone -b <name_of_the_tag> <repository_url> <destination>

Answered   2023-09-20 20:57:12

  • If there are multiple branches for the repository then which branch will be cloned ? - anyone

Checking out Tags

If you want to view the versions of files a tag is pointing to, you can do a git checkout, though this puts your repository in “detached HEAD” state, which has some ill side effects:

$ git checkout 2.0.0
Note: checking out '2.0.0'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

  git checkout -b <new-branch-name>

HEAD is now at 99ada87... Merge pull request #89 from schacon/appendix-final

$ git checkout 2.0-beta-0.1
Previous HEAD position was 99ada87... Merge pull request #89 from schacon/appendix-final
HEAD is now at df3f601... add atlas.json and cover image

In “detached HEAD” state, if you make changes and then create a commit, the tag will stay the same, but your new commit won’t belong to any branch and will be unreachable, except for by the exact commit hash. Thus, if you need to make changes—say you’re fixing a bug on an older version, for instance—you will generally want to create a branch:

$ git checkout -b version2 v2.0.0
Switched to a new branch 'version2'

If you do this and make a commit, your version2 branch will be slightly different than your v2.0.0 tag since it will move forward with your new changes, so do be careful.

Answered   2023-09-20 20:57:12

I do this is via the github API:

curl -H "Authorization: token %(access_token)s" -sL -o /tmp/repo.tar.gz "http://api.github.com/repos/%(organisation)s/%(repo)s/tarball/%(tag)s" ;\
tar xfz /tmp/repo.tar.gz -C /tmp/repo --strip-components=1 ; \

Answered   2023-09-20 20:57:12

  • This works for branches and tags, but not head of master which needs a tag created against it. Imho quite elegant way to get minimally sized version. - anyone

I frequently used one

git clone  --branch <tag_name> <repo_url>

Answered   2023-09-20 20:57:12

I did as below

git checkout tags/20210511 -b 20210511-release

Answered   2023-09-20 20:57:12